View UPG181GR-E1-A_1332681.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GaAs MMIC DBS TWIN IF SWITCH UPG181GR
FEATURES
* TWO INDEPENDENT IF CHANNELS * INTEGRAL SWITCHING TO CHANNEL INPUT TO EITHER CHANNEL OUTPUT * INSERTION LOSS PER CHANNEL: 5.0 dB TYP (ZO = 50 ) * FREQUENCY RANGE: 950 MHz to 2150 MHz * CHANNEL TO CHANNEL ISOLATION: 33 dB TYP * SMALL 16 PIN HTSSOP PACKAGE * AVAILABLE ON TAPE AND REEL
1.5 0.650.1 0.200.10
N
OUTLINE DIMENSIONS (Units in mm)
16 pin HTSSOP
6.40.3 0.200.10 0.4 0.5
1.8
5.50.3
2.7
5.20.2
0.90.2
0.1 2.5
DESCRIPTION
NEC's UPG181GR is intended for use in Direct Broadcast Satellite (DBS) applications within the Low Noise Block (LNB) down-converter for systems where at least two LNB outputs are required. It offers two intermediate frequency amplifier channels that can independently select 1 of 2 IF inputs. It is housed in a very small 16 pin plastic HTSSOP package and is available on tape-and-reel. The UPG181GR is easy to install and contributes to miniaturizing the systems.
ELECTRICAL CHARACTERISTICS
(TA = +25C, unless otherwise specified, VCONT1 to VCONT4 = 0/+5 V, ZO = 50 , LL, LR, RL, RR Each Port) PART NUMBER PACKAGE OUTLINE SYMBOLS LINS LINS LINS ISOL ISOL RLOUT ICONT PARAMETERS AND CONDITIONS Insertion Loss, f = 0.95 GHz to 2.15 GHz Insertion Loss Flatness, | LINS (0.95 GHz)--LINS (1.7 GHz)| Insertion Loss Flatness, | LINS (0.95 GHz)--LINS (2.15 GHz)| Channel Isolation, Channel Isolation, f = 0.95 GHz to 1.7 GHz f = 1.7 GHz to 2.15 GHz UNITS dB dB dB dB dB dB A UPG181GR 16 pin HTSSOP MIN -- -- -- 30 25 13 -- TYP 5.0 0.5 0.8 33 30 16 -- MAX 7.0 1.2 1.5 -- -- -- 200
Output Return Loss, f = 0.95 GHz to 2.15 GHz Control Current, VCONT = +5 V/0 V, RF OFF
California Eastern Laboratories
UPG181GR ABSOLUTE MAXIMUM RATINGS1 (TA = +25C)
SYMBOLS PTOT TA TSTG PARAMETERS Total Power Dissipation3 UNITS V W C C RATINGS -1 to +6 2 -40 to +85 -65 to +150 VCONT1,2,3,4 Control Voltage 1, 2, 3, 42 Operating Ambient Temp. Storage Temperature
RECOMMENDED OPERATING CONDITIONS (TA = +25C)
SYMBOLS VCONT(H) VCONT(L) PARAMETERS Control Voltage (High) Control Voltage (Low) UNITS MIN TYP MAX V V +4.5 -0.5 +5 0 +5.5 +0.5
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. | VCONT(H) -- VCONT(L) | 6.0 V 3. Mounted on a 50x50x1.6 mm double copper clad epoxy glass PWB, TC = +85C .
ORDERING INFORMATION
PART NUMBER UPG181GR-E1-A PACKAGE 16-pin Plastic HTSSOP QUANTITY 2500/Reel
Notes: 1. Embossed tape, 12 mm wide.
TYPICAL PERFORMANCE CURVES (TA = +25C, unless otherwise specified)
INSERTION LOSS vs. FREQUENCY
log MAG 2 dB/div.
ISOLATION vs. FREQUENCY
log MAG 10 dB/div.
0
0
1
Insertion Loss, LINS (dB)
2
3
Isolation, ISL (dB)
-10
-50
1 2
3
1. -4.49 dB 0.95 GHz 2. -4.93 dB 1.7 GHz 3. -5.31 dB 2.15 GHz
Start 0.050 000 000 GHz Stop 5.050 000 000 GHz
1. -54.70 dB 0.95 GHz 2. -46.12 dB 1.7 GHz 3. -40.84 dB 2.15 GHz
Start 0.050 000 000 GHz Stop 5.050 000 000 GHz
-20
-100
Frequency, f (GHz)
Frequency, f (GHz)
INPUT RETURN LOSS vs. FREQUENCY
log MAG 5 dB/div.
OUTPUT RETURN LOSS vs. FREQUENCY
log MAG 5 dB/div.
0
0
1 2 -25 3
Output Return Loss, RLOUT (dB)
Input Return Loss, RLIN (dB)
2 -25 1
3
1. -17.37 dB 0.95 GHz 2. -15.07 dB 1.7 GHz 3. -13.41 dB 2.15 GHz
Start 0.050 000 000 GHz Stop 5.050 000 000 GHz
1. -32.13 dB 0.95 GHz 2. -19.73 dB 1.7 GHz 3. -19.68 dB 2.15 GHz
Start 0.050 000 000 GHz Stop 5.050 000 000 GHz
-50
-50
Frequency, f (GHz)
Frequency, f (GHz)
UPG181GR EVALUATION CIRCUIT (VCONT1 to VCONT4 = 0/+5 V, ZO = 50 , DC Blocking Capacitor = 1000 pF)
VCONT1 VCONT2
C = 1000 pF IN1 (L) ZO = 50
C = 1000 pF OUT 1 ZO = 50
16
9
1 IN2 (R) ZO = 50 C = 1000 pF
8 ZO = 50 OUT 2 C = 1000 pF
VCONT3 VCONT4
CHANNEL SELECT TRUTH TABLE
OUTPUT On-Channel OUT1 L L R R OUT2 L R L R IN1--OUT1 IN1--OUT2 IN1--OUT1 IN2--OUT2 IN2--OUT1 IN1--OUT2 IN2--OUT1 IN2--OUT2 VCONT1 Low Low High High VCONT2 High High Low Low VCONT3 High Low High Low VCONT4 Low High Low High CONTROL PIN
PIN CONNECTION AND INTERNAL BLOCK DIAGRAM
PIN NO. 1 2 3 4 5 6 7 8 CONNECTION IN2 GND GND VCONT3 VCONT4 GND GND OUT2 PIN NO. 9 10 11 12 13 14 15 16 CONNECTION OUT1 GND GND VCONT2 VCONT1 GND GND IN1
TOP VIEW
16 15 14 13 12 11 10 9
12345678 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 01/15/2001
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.
5-226

▲Up To Search▲

Price & Availability of UPG181GR-E1-A

	To Download UPG181GR-E1-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .